Rear Road Hubs

The RH-260 is the perfect companion to the FH-95. It's a US Made Al 6061 T6 rear road hub designed for the more classic crossed spoked style of wheel with a larger hub shell diameter and larger bearings to increase stiffness without high weight gains over it's lighter sibling, the RH-200. Wide spoke bracing angles makes for great lateral stiffness over most rear hubs, 15/17mm axle combined with two large Enduro 6903 bearings produce a stiff assembly making this the perfect hub for the rough and tumble of daily riding in all conditions. DS end cap is stainless steel, with a dust cover to supply a labyrinth seal against the worst conditions.

• Weight: 260 grams
• Bearings: 6903-2RS x 2, 6902-2RS x 2 (SH) 6802-2RS x 2 (CA)
• Spoke Hole Diameter: 56/56mm
• Center to Flange: 18/36mm

The RH-230 is the perfect companion to the FH-70. It's a US Made Al 6061 T6 rear road hub designed for the more classic crossed spoked style of wheel with a larger hub shell diameter and larger bearings to increase stiffness without high weight gains over it's lighter sibling, the RH-200. Wide spoke bracing angles makes for great lateral stiffness over most rear hubs, 17mm axle combined with two large SKF 6903 bearings produce a stiff assembly making this the perfect hub for the rough and tumble of daily riding in all conditions. NDS flange has "window" cutouts like the high flange hubs of the past providing an extra element of style. DS end cap is equipped with a dust cover to supply a labyrinth seal against the worst conditions.

• Weight: 230 grams
• Bearings: 6903-2RS x 2, MR15276-2RS  x 2 (SH) 6802-2RS x 2 (CA)
• Spoke Hole Diameter: 56/56mm
• Center to Flange: 18/36mm

Or move up to the RH-200, for weight savings over the RH-230. It's a US Made rear road hub designed for both the classic crossed spoked style of wheel and radial lacing (LH ONLY) , with a large hub shell diameter and larger bearings to increase stiffness with a lower weight than it's predecessor, the RH-215. Wide spoke bracing angles makes for great lateral stiffness over most rear hubs, 17/15mm tapered axle combined with large SKF 6903 and 6902 bearings produce a stiff assembly making this the perfect hub for the rough and tumble of daily riding in all conditions without a high weight compared to other hubs.

• Weight: 200 grams
• Bearings: 6903-2RS x 1, 6902-2RS x 1, 6803 x 2ea (SH) 6802 x 2 (CA)
• Spoke Hole Diameter: 50/46mm
• Center to Flange: 18/36mm

Upgrade to ceramic bearings, and USL Ti QR's available. Chose "USL Upgrade" below.

Straight Pull Radial NDS spoke 190gm version also available. Choose "Straight Pull" option.

If you prefer Radial NDS spoking and a lighter weight, choose the RH-185, which is the perfect companion to the FH-60. It's a US Made rear road hub designed for NDS radial lacing, with a larger hub shell diameter and larger bearings to increase stiffness with a lower weight than it's predecessor, the RH-205. Wide spoke bracing angles makes for great lateral stiffness over most rear hubs, 15/17mm axle combined with SKF 6903 and 6802 bearings produce a stiff assembly making this the perfect hub for the rough and tumble of daily riding in all conditions without a high weight compared to other hubs.

• Weight: 185 grams
• Bearings: 6903-2RS x 1, 6802-2RS x 1, 6803 x 2ea (SH) 6802 x 2 (CA)
• Spoke Hole Diameter: 50/38mm
• Center to Flange: 17.5/35mm

Upgrade to ceramic bearings, carbon dust covers, and USL Ti QR's available. Chose "USL Upgrade" below.

Straight Pull Radial NDS spoke 170gm version also available. Choose "Straight Pull" option.

For the ultimate in weight savings, the RH-160 is available, the companion to the FH-50. It's a US Made rear road hub designed for NDS radial lacing, with a smaller hub shell diameter and medium size bearings to give a lower weight than our other hubs. Wide spoke bracing angles makes for great lateral stiffness. 15mm axle combined with MR15267 and 6802 ceramic bearings produce a stiff assembly making this the perfect hub for those lightweight builds. Dust covers are carbon fiber, adding a unique look to this high end jewel.

• Weight: 160 grams
• Bearings: MR17287-2RS x 1, 6802-2RS x 1, 6803 x 2ea (SH) 6802 x 2 (CA)
• Spoke Hole Diameter: 48/38mm
• Center to Flange: 17.5/35mm

Straight Pull Radial NDS spoke 145gm version also available. Choose "Straight Pull" option.

NOTE: When we state "US Made", all parts in our rear hubs are manufactured in Orange County excluding bearings and freehub bodies on all models excluding the RH-160. Machining, Polishing, Anodizing and Laser Marking have all been performed by the same companies since the beginning (with a few trials of alternatives that taught us we got it right first time), giving continuity of quality and refinement through experience that only repetition of production can give. Our aluminum is certified aerospace grades from Kaiser Aluminum, an Orange County based firm that has produced high quality aluminum since the 1940's.